Awkward cable entry? Hylec has a Kwik Fix

Hylec-APL has expanded its range of cable glands with the introduction of Kwik Fix, which is suitable for applications where access to the interior of a bulkhead or enclosure is restricted. Kwik Fix can be used to form a quick, IP68 connectionand is installed by placing the mounting foot of the gland through the entry hole. The mounting foot has a lip that can be pulled tight against the inner wall; an external hexagonal locking nut is then turned anti-clockwise to hold the gland in place.

Once locked in place, the cable can be installed in the traditional manner; tightening the top dome nut in a clockwise direction. This means that the gland can be easily mounted and dismounted from one side making installation and maintenance far simpler. The gland is suitable for a panel thickness ranging from 1mm to 4mm.
 

Contact Details and Archive...

• Hylec Components

Related Articles...

• Legrand launches 'universal' cable tray tool
• E-RIVI: a new floor mount cable conduit system from ETA Enclosures
• A handheld label printer for electricians
• Ratcheting strain relief for round and double 'D' holes
• Portable label makers feature built-in Bluetooth for wireless printing

Most Viewed Articles...

• UK entrepreneurship: strong on start-up; weak on aspiration
• GSM communication with six inputs and four relay outputs
• Latching system stems HVAC enclosure leaks
• Meaner resources spur the MENA region into action
• Visit Danfoss at the Drives & Controls exhibition 2012

Print this page | E-mail this page

E-mail this page

Your name :
Recipient name :
Recipient e-mail :
Enter the code shown :