Panel mounted device displays transducer values

Local display of transducer values from a variety of sources, including displacement, pressure, load and torque can be incorporated into control panels using an E725 signal conditioner and display unit from RDP Electronics Ltd. In addition to displaying values, the unit is able to transmit signals concerning transducer status to PLCs or other connected control devices.

The E725 incorporates signal conditioning for transducers, offers a clear 5-digit display, with fast peak and trough detection and limit trips shown by indicator lights and has options such as relay outputs. It has a 4-20mA 2-wire output that can be connected to a suitable analogue input on a PLC and can also provide serial communication via RS232 or RS485 with the controlling device.

The settings can be password protected and, if required, the whole panel can be disabled to prevent tampering. The E725 is compactly housed and can be used in a stand-alone mode as well as panel mounted.

 

Contact Details and Archive...

• RDP Electronics

Related Articles...

• RS Components launches industry-first app for its branch network
• Lean automation: what is it? What's the advantage?
• New website for panel builders with online ordering
• Large digit, loop powered indicators
• Eaton adds more I/O options for SmartWire-DT

Most Viewed Articles...

• UK entrepreneurship: strong on start-up; weak on aspiration
• GSM communication with six inputs and four relay outputs
• Latching system stems HVAC enclosure leaks
• Meaner resources spur the MENA region into action
• Visit Danfoss at the Drives & Controls exhibition 2012

Print this page | E-mail this page

E-mail this page

Your name :
Recipient name :
Recipient e-mail :
Enter the code shown :